This Product Has Been Discontinued (Limited Stock May Be Available)

Click here to view similar products

Aluminum Framed Decon Shower 8.5'L x 12'W x 8.25'H

There are no reviews yet. | Write a review
Item #: DATAL1014S
UOM: Each
Min Order: 0
Order Qty: Must order in multiples of 1
Quote Required
View additional buying options
Product Details

Aluminum Framed Decon Shower 8.5'L x 12'W x 8.25'H

The DATAL 1014S is a 2 Line Mass Casualty Decon Shower System that can handle two non-ambulatory stretchers or 4 ambulatory personnel or combinations or the above

All parts are pre-assembled w/ no special tools required. Frame system is made of interconnected aluminum tubes that fold out in a scissor type movement. To ‘Quick Erect’- place the floor cover in the designated area and then place the closed/folded up DAT® AL™ series unit in the center of the floor cover. With 2-4 support personnel (size of unit dependent) have personnel grip each corner. Pull the width support frames slowly until unit is fully open and fits floor cover exactly. Then from underneath - lift the center of the tent upwards until the two sides reach the ground almost perpendicular to one another. Clip the buckles together at the four corners (inside of the frame) while supporting the center of the tent in the air. Check/final position canopy and affix floor with HD velcro attachments. Commence use.

System includes:

  • Air Inflation Valve
  • Inflation Hose
  • Pressure Relief Valve
  • Tie down ropes
  • D-rings
  • Repair Kit
  • Manual
  • Shelter sleeve
  • Air vents
  • Roll Up Windows
  • Air Ducts
  • Hammer

Aluminum Framed Decon Shower 8.5'L x 12'W x 8.25'H

Measurements: 8.5’ W x 12’ L x 8.25’ H - 102 ft2
Weight: 170 lbs
Carton Size: 45" L x 45" W x 55" H
Certifications: ANSI 113 compliant
Material: - Heavy duty 100% nylon twill (3/5) w/ PU white pigment inner coating
- UV/chemical resistant/fire retardant
– UV resistant and water repellent w/ a hydrostatic resistance of 250 psi +
- Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508
- Fire resistance meets and exceeds CPAI 84 SECTION 5 1995
- US Fed. Test CFR.1610
- meets NFPA701 Flammability Test method 1 (2004)
- NFPA 702 w. ‘A’ burn scale rating
Dimensions: Approx. 23mm X 57/58
Weight: Approx. 1.230 gr/m2
Inner Canopy
Material: 100% Nylon 210T Antron Water Resistant, Polyurethane Coated 57/58"
Flame Retardant to meet 'NFPA-701 TM-1'
Color: White
Material: 1,000 denier Nylon coated w/ PU
Tensile Strength: 2545N/2360
Tear Strength: 106/102N
Weight: 490 g/yd
Material: Retractable, corrosion resistant, 16mm HD aluminum tubing w/ 1.5mm wall thickness tubing shelter w/ high density polyfiber hub
Length per section: 29"
Minimum Tear Strength: 31,200 psi
Wind Resistance: Approx. 55 mph
Roof Load: Approx. 2,200 lbs. – 20 + lbs/ft2

Aluminum Framed Decon Shower 8.5'L x 12'W x 8.25'H

There are no reviews yet.

Related Items