Item #: AS3-KS15-1101
Price: $1,682.00
$1,682.00

GX-2009 4-Gas Detector inCase Calibration Kit w/ 20L Calibration Gas

This GX-2009 single meter kit is equipped with a GX-2009 (O2/LEL/CO/H2S) and includes pass-thru charging, a 20L of O2/LEL/CO/H2S calibration gas, a demand flow regulator, attachable sample pump, and supporting accessories.

Features:

  • inCase Charging: pass-thru charging port to charge directly through case
  • inCase Calibration: 20L cylinder with demand flow regulator
  • inCase Storage: hard case with custom foam and cutouts for 15' tubing, manual, product CD, and charger

GX-2009 4-Gas Detector inCase Calibration Kit w/ 20L Calibration Gas

GX-2009 Specifications
Sampling Method Diffusion sampling standard / hand aspirator or motorized pump optional
Display Digital LCD displays all four gases simultaneously, with auto backlight
Types of Alarms Gas Alarm: 2 Increasing alarms, STEL, TWA, overscale alarm. O2 decreasing/increasing.
Trouble alarm: Sensor disconnection, low battery, circuit error, calibration range error
Display of Alarm Gas Alarm: Flashing LEDs, intermittent buzzer (95 db @ 30 cm), flashing gas value, vibration

Trouble alarm: Flashing LEDs, intermittent buzzer (95 db @ 30 cm), display of error message
Operating Temp. & Humidity -4°F to 122°F (-20°C ~ +50°C), 0 to 95% RH, non-condensing (splash resistant)
Response Time Within 30 seconds (T90)
Continuous Operation 20 hours after a 3 hour full charge (14 hours after 90 min charge)
Power Source Direct charging NiMH batteries, set of 2
Safety Design / Approvals IECEx zone 0 Ex ia IIC T4; ATEX II 1G Ex ia IIC T4; (optional MSHA version also available)
c CSA us classified, as intrinsically safe. Class I, Division 1, Groups A, B, C, D
Dimension & Weight 2.7” H x 3” W x 1” D (Approx. 70 H x 75 W x 25 D mm), 4.6 ounces (approx. 130 g)
Case Material High impact over molded rubber. Dust and water resistant with IP-67 approval.
Controls Two buttons: POWER / MODE, AIR
Datalogging Standard with all instruments. Stores 8 alarm trend sessions where readings are recorded 30 minutes
before and after an alarm event. 3,600 data point capacity with a log time range of 10 to 300 hours
(based on programmable interval times); and stores up to 100 calibration records.
Sensor Specs Combustible Gases (LEL)
  • Range: 0 ~ 100% LEL (1% LEL increments)
  • Accuracy: ± 5% of reading or ± 2% LEL (whichever is greater)
  • Preset Alarms: 1st alarm 10% LEL, 2nd alarm 50% LEL, Over alarm 100% LEL
Oxygen (O2)
  • Range: 0 ~ 40.0% Vol. (0.1% Vol. increments)
  • Accuracy: ± 0.5% O2
  • Preset Alarms: Low alarm 19.5%, High alarm 23.5%, Over alarm 40.0%
Carbon Monoxide (CO)
  • Range: 0 ~ 500 ppm (1 ppm increments)
  • Accuracy: ± 5% of reading or ± 5 ppm CO (whichever is greater)
  • Preset Alarms: 1st alarm 25 ppm, 2nd alarm 50 ppm, TWA alarm 25 ppm, STEL alarm 200 ppm, Over alarm 500 ppm
Hydrogen Sulfide (H2S)
  • Range: 0 ~ 100.0 ppm (0.5 ppm increments)
  • Accuracy: ± 5% of reading or ± 2 ppm H2S (whichever is greater)
  • Preset Alarms: 1st alarm 5 ppm, 2nd alarm 30 ppm, TWA alarm 1 ppm, STEL alarm 5 ppm, Over alarm 100 ppm
Warranty Two years material and workmanship