81-SDME2 Stand Alone Docking and Calibration Station for Eagle 2
The 81-SDME2 is a versatile maintenance tool for the Eagle 2 portable gas monitor. This docking station can be used as a stand-alone device for charging, calibration and bump testing, with all records automatically stored for future upload to a PC via USB flash drive (PC software and flash drive included).
The 81-SDME2 can also be connected to a PC for automated calibration bump testing and archiving of datalog data from Eagle 2 instruments. Up to ten 81-SDME2 docking stations can be connected simultaneously using USB cables (not included). The 81-SDME2 is also equipped with two gas ports to connect up to two calibration gas mixtures to the multi module system.
Features:
- Stand-alone station (no connection to PC required)
- Charging (NiMH batteries)
- Calibration
- Bump Test
- Save bump test and calibration records
- Bump test and calibration records copy to USB jump drive
- 2 Calibration gas ports
- Includes PC software for viewing/archiving bump test and calibration records
81-SDME2 Stand Alone Docking and Calibration Station for Eagle 2
| Input Power |
- AC Adapter with 100 - 240 VAC, 50/60 Hz, 0.6A input and 12 VDC, 1.2A output provided as standard. |
| Environmental Conditions |
- For Indoor Use Only
- -10° C to 40° C, below 80% Relative Humidity,
Non-Condensing |
| Applicable Instruments |
Eagle 2 |
| Maximum Number of Records Saved |
200 |
| Calibration Gas Ports |
Connect up to 2 calibration gas cylinders to each station |
| Standard Accessories |
- AC Adapter
- USB Flash Drive
- Single Module Data Viewer Software
- SDM Docking Station PC Controller Software
- Inlet Air Filter
- Instruction Manual
- 10' Exhaust Tube
|
81-SDME2 Stand Alone Docking and Calibration Station for Eagle 2
There are no reviews yet.