Chlorine Detection Tubes 50/a (50 - 500 ppm)
For short-term measurements more than 160 Draeger-Tubes are available to measure the so-called spot concentrations of specific gases. A wide range of different gases and vapours can be detected and measured, e.g.: Determining and measuring concentration peaks, Measuring personal exposure in the inhalation area, Detecting leaks in pipelines, gas installations etc., and Air analysis in sewers, shafts and confined spaces.
Contains 10 tubes
Standard Measuring Range | 50 to 500 ppm |
Number of Strokes (n) | 1 |
Time for Measurement | approx. 20 sec. |
Standard Deviation | ±10 to 15 % |
Colour Change | gray green ─> orange brown |
Temperature | 10 to 40° C |
Absolute Humidity | < 40 mg H2O / L |
Reaction Principle | Cl2 + t-olidine ──> orange brown reaction product |
Cross Sensitivity | Bromine is indicated with the same sensitivity, but with a higher standard deviation ± 25 to 30% Chlorine dioxide and nitrogen dioxide are indicated as well, but with different sensitivities. |