Cyclohexylamine Detection Tubes 2/a (2 - 30 ppm)
For short-term measurements more than 160 Draeger-Tubes are available to measure the spot concentrations of specific gases. Measurement usually takes between 4 seconds and 15 minutes. The tubes are used either manually with the Draeger-Tube Accuro Pump or automatically with the Draeger X-act 5000.
A wide range of different gases and vapours can be detected and measured, such as:
- Determining and measuring concentration peaks
- Measuring personal exposure in the inhalation area
- Detecting leaks in pipelines, gas installations etc.
- Air analysis in sewers, shafts and confined spaces
Cyclohexylamine Detection Tubes 2/a (2 - 30 ppm)
| Standard Measuring Range: |
2 to 30 ppm |
| Number of Strokes (n): |
10 |
| Time for Measurement: |
approx. 4 min |
| Standard Deviation: |
�15 to 20 % |
| Color Change: |
yellow ?> blue |
| Temperature: |
15 to 35� C |
| Absolute Humidity: |
3 to 15 mg H2O / L |
| Reaction Principle: |
C6H11NH2 + pH-indicator ??>
blue reaction product |
| Cross Sensitivity: |
Other basic substance such as organic amines and ammonia are indicated as well. |
Cyclohexylamine Detection Tubes 2/a (2 - 30 ppm)
There are no reviews yet.