Hydrochloric Acid Detection Tubes 1/a (0.5 - 100 ppm)
For short-term measurements more than 160 Draeger-Tubes are available to measure the so-called spot concentrations of specific gases. A wide range of different gases and vapours can be detected and measured, e.g.: Determining and measuring concentration peaks, Measuring personal exposure in the inhalation area, Detecting leaks in pipelines, gas installations etc., and Air analysis in sewers, shafts and confined spaces.
Contains 10 tubes
|Standard Measuring Range||0.5 to 100 ppm|
|Number of Strokes (n)||10|
|Time for Measurement||approx. 2 min.|
|Standard Deviation||±10 to 15 %|
|Colour Change||blue ─> yellow|
|Temperature||5 to 40° C|
|Absolute Humidity||max. 15 mg H2O / L|
|Reaction Principle||HCl + Bromophenol blue ──> yellow|
|Cross Sensitivity||Hydrogen sulfide and sulfur dioxide |
in the TLV range do not interfere.
It is impossible to measure
hydrochloric acid in the presence
of other mineral acids.
Chlorine and nitrogen dioxide are
indicated, but with different