Monostyrene Detection Tubes 10/a (10 - 200 ppm)
For short-term measurements more than 160 Draeger-Tubes are available to measure the spot concentrations of specific gases. Measurement usually takes between 4 seconds and 15 minutes. The tubes are used either manually with the Draeger-Tube Accuro Pump or automatically with the Draeger X-act 5000.
A wide range of different gases and vapors can be detected and measured, such as:
- Determining and measuring concentration peaks
- Measuring personal exposure in the inhalation area
- Detecting leaks in pipelines, gas installations etc.
- Air analysis in sewers, shafts and confined spaces
Monostyrene Detection Tubes 10/a (10 - 200 ppm)
| Standard Measuring Range: |
10 to 200 ppm |
| Number of strokes n: |
max. 15 |
| Time for Measurement: |
max. 3 min |
| Standard Deviation: |
± 15 to 20 % |
| Color Change: |
white ??> pale yellow |
| Temperature: |
15 to 40 °C |
| Absolute Humidity: |
< 15 mg H2O / L |
| Reaction Principle: |
C6H5-CH=CH2 + H2SO4 ??> pale yellow reaction product |
| Cross Sensitivity: |
Other organic compounds which tend toward polymerization (e. g. buta diene) are indicated, but with different sensitivities. It is impossible to measure monostyrene in the presence of these compounds. |
Monostyrene Detection Tubes 10/a (10 - 200 ppm)
There are no reviews yet.