Portable Pneumatic Hazmat Decon Shower System

There are no reviews yet. | Write a review
Item #: DAT2626S
MFG: FSI
UOM: Each
Min Order: 0
Order Qty: Must order in multiples of 1
Quote Required
Qty:
View additional buying options
Product Details

Portable Pneumatic Hazmat Decon Shower System

The FSI DAT 2626S is a one-line wide, Single Non-Ambulatory Decon Shower System meant to handle a single stretcher borne victim with attendants working on either side. Can also be used to decon 2 walking wounded personnel at a time. This unit deploys in 1 - 2 minutes, and processes one stretcher borne or 2 walking victims at a time.

The shower station includes 4 hanging coiled ½” hose lines with attached multiple function spray nozzles which thoroughly drench and decontaminates via a fine water mist. Shutoffs and quick disconnects supplied with every trigger gun. Flows per spray gun = approx. 1 gpm optimum and dependent on water volumes available. As an option -- one can double the capacity if required.

Wastewater is contained within integral ground floor and 8” berm erected when system is initially inflated (holds approx. 220 gallons of waste water before pump-out is required).

All canopy walls are velcro'd to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms. Units can attach to a second shower or FSI shelter.

This Shower System Includes:

  • Full closure slip in and out dirty entry/clean exit doors on each end
  • (2) Roll up windows (one on each side)
  • (2) Skylights
  • Air inflation/deflation valve
  • Air inflation hose w/ safety cord
  • High pressure valve
  • High pressure relief valve
  • (6) Metal stakes & Ground anchor points
  • Tie down ropes
  • (4) D-Rings
  • Repair kit
  • Manual
  • Shelter sleeve
  • (2) Upper air vents
  • (8) 19" diameter HVAC/dirty clothes ducts with ties closures (2 each on each end/side)
  • Small electrical duct
  • Hammer
  • Electric inflator/deflator
  • High pressure SCBA fitting

Portable Pneumatic Hazmat Decon Shower System

DAT2626S
Measurements: one - line wide 7' W X 13’ L X 8’ H
Approx. 91ft2
Weight: 180 lbs.
Carton Size: 48” L X 43” W X 30” H
Air pressure internally once inflated: 4.3 psi
Total Weight: 1055 g/m2
Thickness: 0.90 mm
Cut strip tensile strength: Warp = 450 lbs/in
Weft = 404 lbs/in
Elongation: Warp = 30%
Weft = 47%
Tongue tear: Warp = 87 lbs
Weft = 100 lbs
Adhesion: Warp = 9.4 lbs/in
Weft = 8.9 lbs/in
Density:30 X 24.5
Certifications: ANSI 113-200X compliant
Frame
Material: - Heavy Duty 1100 Dtex polyester coated w/ plastomer on both sides
- UV/Chemical resistant
- Quadruple overlapped and glued.
Canopy
Material: - Heavy duty 100% nylon twill (3/5) w/ PU white pigment inner coating
- UV/chemical resistant/fire retardant
- UV resistant and water repellent w/ a hydrostatic resistance of 250 psi + -
- Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508
- Fire resistance meets and exceeds CPAI 84 SECTION 5 1995
- US Fed. Test CFR.1610
- Meets NFPA701 Flammability Test method 1 (2004)
- NFPA 702 w/ ‘A’ burn scale rating
- All seams double stitched and coated both sides.
Dimensions: Approx. 23mm X 57/58
Weight: Approx. 1.230 gr/m2
Inner Canopy
Material: - 100% Nylon 210T Antron Water Resistant Polyurethane Coated 57/58"
- Flame Retardant to meet 'NFPA-701 TM-1'
- Anti-fungus/Anti-mildew
- Opaque
Color: White
Floor
Material:PVC of 0.58mm thickness (1,000 Dtex, 18 X 18 polyester)
Weight: 660 gr/mm2
Width: 60 in

Portable Pneumatic Hazmat Decon Shower System

There are no reviews yet.


Related Items