Aluminum Framed Decon Shower
This Aluminum Framed Series Decon Shower from FSI is L 1.83 m x W 3.62m x H 2.5 m H (6 ft L X 12 ft W X 8.25 ft H), 72 sq ft approx. 210 lbs., packed dim. 40" X 40" X 52" with 4 ft. Undress/ 4.4 ft. Shower/ 4 ft. Redress areas. This is a First Responder Ambulatory Decon shower system with 6 spray nozzles and 2 trigger gun with coiled hoses. See DAT2525S for comparable pneumatic model.
The decon shower comes equipped as standard equipment with an attachable ground floor and decon pool that will hold up to 100 gallons (400 liters) of water(with an 8"/20 cm berm approx.) before requiring pump out, 2 roll up windows -- one on each side, 1 skylight, full closure slip in and out dirty entry/clean exit doors on each end. All canopy walls are velcro'd to the floor, and reflective striping is found on the upper air vents above doors and on entry and exit air berms. Units can attach to a 2nd shower/FSI Shelter.
This shower system includes:
- Air Inflation Valve
- Inflation Hose
- Pressure Relief Valve
- Tie Down Ropes
- D-Rings
- Repair Kit
- Manual
- Carry Bag
- Air Vents
- Roll Up Windows
- Air Ducts
- Hammer
Standards ANSI # 113 compliant. See DAT2525S for comparable pneumatic model. See DATAL814S-DIL for a disposable inner liner/ replaceable canopy for this item.
Aluminum Framed Decon Shower
There are no reviews yet.
The decon shower comes equipped as standard equipment with an attachable ground floor and decon pool that will hold up to 100 gallons (400 liters) of water(with an 8"/20 cm berm approx.) before requiring pump out, 2 roll up windows -- one on each side, 1 skylight, full closure slip in and out dirty entry/clean exit doors on each end. All canopy walls are velcro'd to the floor, and reflective striping is found on the upper air vents above doors and on entry and exit air berms. Units can attach to a 2nd shower/FSI Shelter.
This shower system includes:
- Air Inflation Valve
- Inflation Hose
- Pressure Relief Valve
- Tie Down Ropes
- D-Rings
- Repair Kit
- Manual
- Carry Bag
- Air Vents
- Roll Up Windows
- Air Ducts
- Hammer
Standards ANSI # 113 compliant. See DAT2525S for comparable pneumatic model. See DATAL814S-DIL for a disposable inner liner/ replaceable canopy for this item.
]##">