Aluminum Framed Decon Shower 11'L x 12'W x 8.25'H

There are no reviews yet. | Write a review
Item #: DATAL1514S
Quote Required
View additional buying options

Aluminum Framed Decon Shower 11'L x 12'W x 8.25'H


  • L 3.35 m x W 3.62 m x H 2.5 m H (11 ft L X 12 ft W X 8.25 ft H)
  • 132 sq ft.
  • Approx. 260 lbs.
  • Packed dim. 48" X 48" X 58"
  • 2-Line, 3 or 4 stage Mass Casualty Decon
  • Shower System Undress/Detergent Shower /Rinse Shower/Redress configuration
  • Decon 2 to 4 ambulatory personnel, 2 non-ambulatory or any combination at one time
  • See DAT3535S for comparable pneumatic model

This shower system includes:

  • Air Inflation Valve
  • Inflation Hose
  • Pressure Relief Valve
  • Tie Down Ropes
  • D-Rings
  • Repair Kit
  • Manual
  • Carry Bag
  • Air Vents
  • Roll Up Windows
  • Air Ducts
  • Hammer
Standards ANSI # 113 compliant. See DAT3535S for comparable pneumatic model. See DATAL1514S-DIL for a disposable inner liner/ replaceable canopy for this item.

Canopy: Heavy duty 100% nylon twill (3/5) w. PU white pigment inner coating, ABT. 0 23mm X 57/58. Wt. AB1.230GR/Sq. M - UV/chemical resistant/fire retardant UV resistant and water repellent w. a hydrostatic resistance of 250 psi + - Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 - Fire resistance meets and exceeds CPAI 84 SECTION 5 1995, US Fed. Test CFR.1610, meets NFPA701 Flammability Test method 1 (2004), NFPA 702 w. A burn scale rating.

Inner canopy: If applicable - of 100% NYLON 210T ANTRON W/R, POLYURETHANE COATED 57/58", Color: White - Flame Retardant to meet 'NFPA-701 TM-1', Anti-fungus/Anti-mildew, opaque

Floor: 1,000 denier Nylon coated w. PU, tensile strength: 2545N/2360, Tear Strength: 106/102N, weight: 490 g/yd.


  • Patent pending
  • retractable, corrosion resistant, 16mm HD aluminum tubing with 1.5mm
  • wall thickness tubing shelter w. high density polyfiber hub. Length per section = 73cm (29). Minimum tear strength of 215 Mpa (31,200 psi).
  • Complete with welded 650 g/sqm double fabric at the frame/canopy connector points for maximum product strength at all critical locations.
  • Approx. 55 mph wind resistance; approx. roof load 2,200 lbs. 20 + lbs/sq ft.

DAT AL SERIES Quick Erect General Set up and Tear down Instructions:

All parts are pre-assembled with no special tools required. Frame system is made of interconnected aluminum tubes that fold out in a scissor type movement.

To Quick Erect-

  • Place the floor cover in the designated area and then place the closed/folded up DAT AL series unit in the center of the floor cover.
  • With 2-4 support personnel (size of unit dependent) have personnel grip
  • Pull the width support frames slowly until unit is fully open and fits floor cover exactly.
  • Then from underneath - lift the center of the tent upwards until the two sides reach the ground almost perpendicular to one another.
  • Clip the buckles together at the four corners (inside of the frame) while supporting the center of the tent in the air.
  • Check/final position canopy and affix floor with HD velcro attachments.
  • Commence use.

Standard color is a blue color designated as FSI Blue?? exterior w. high visibility white inside color. Green, White, and Tan/Sand exterior canopy color also available at no extra cost. Other colors available P.O.A.

Related Items
Decon Pool w/ Shower Steel Frame
Decon Pool w/ Shower Steel Frame

Husky Portable Containment

Decon Pool w/ Shower Aluminum Frame
Decon Pool w/ Shower Aluminum Frame

Husky Portable Containment