MultiRAE Pro PID Gas Detector, PGM-6248
The MultiRAE Pro sets the standard for portable gas detection with its sensitive PID sensor option capable of reading in parts per billion, gamma radiation capability, and an industry-leading selection of interchangeable electrochemical, infrared (NDIR), and combustible sensors.
The combination of best-in-class detection capabilities and optional wireless connectivity makes the MultiRAE Pro the ideal choice for military, homeland security, and hazmat teams.
Features:
- Parts per billion VOC measurement (optional)
- Simultaneous monitoring of chemical threats and gamma radiation
- Real-time data access from central command
- More than 25 different chemical sensors
- Swappable smart sensors
- Man down alarm
- Simple maintenance with replaceable sensors, pump, and battery
- Fully automatic bump testing and calibration with AutoRAE 2
- 5-way local and remote wireless alarm
- Mil-STD-810G certified
MultiRAE Pro PID Gas Detector, PGM-6248
SIZE: 7.6" H x 3.8" W x 2.6" D (193 x 96.5 x 66 mm)
WEIGHT: 31 oz (880 g)
SENSORS: Over 25 intelligent interchangeable field-replaceable sensors including gamma radiation, ppb and ppm PID sensors for VOCs, electrochemical sensors for toxic gases and oxygen, combustible LEL and NDIR sensors, and CO2 NDIR sensor
BATTERY OPTIONS, RUNTIME, & RECHARGE TIME:
- Rechargeable Li-ion (~12-hr. runtime, < 6-hr. recharge time)
- Extended duration Li-ion (~18-hr. runtime, < 9-hr. recharge time)
- Alkaline adapter with 4 x AA batteries (~6-hr. runtime)
DISPLAY: Monochrome graphical LCD display (128 x 160) with backlighting and automatic screen “flip” feature
DISPLAY READOUT:
- Real-time reading of gas concentrations; PID measurement gas and correction factor; Man Down Alarm on/off; visual compliance indicator; battery status; datalogging on/off; wireless on/off and reception quality.
- STEL, TWA, peak, and minimum values
KEYPAD BUTTONS: 3 operation and programming keys (Mode, Y/+, and N/-)
SAMPLING: Built-in pump. Average flow rate: 250 cc/min. Auto shutoff in low-flow conditions
CALIBRATION: Automatic with AutoRAE 2 Test and Calibration System or manual
ALARMS:
- Wireless remote alarm notification; multi-tone audible (95 dB @ 30 cm), vibration, visible (flashing bright red LEDs), and on-screen indication of alarm conditions
- Man Down Alarm with pre-alarm and real-time remote wireless notification
DATALOGGING:
- Continuous datalogging (6 months for 5 sensors at 1-minute intervals, 24/7)
- User-configurable datalogging intervals (from 1 to 3,600 seconds)
COMMUNICATION AND DATA DOWNLOAD:
- Data download and instrument set-up and upgrades on PC via desktop charging and PC comm. cradle, travel charger, or AutoRAE 2 Automatic Test and Calibration System
- Wireless data and alarm status transmission via built-in RF modem (optional)
WIRELESS NETWORK: Safety Suite or EchoView Host-based Closed-Loop System
WIRELESS RANGE (TYPICAL):
- MultiRAE Pro to RAELink3 [Z1] Mesh modem ~330 feet (100 meters)
- MultiRAE Pro to EchoView Host, RAEMesh Reader or RAEPoint ~660 feet (200 meters)
- MultiRAE Pro to Access Point ~ 330 feet (100 meters)
OPERATING TEMPERATURE: -4° to 122°F (-20° to 50°C)
HUMIDITY: 0% to 95% relative humidity (non-condensing)
DUST AND WATER RESISTANCE: IP-65 ingress protection rating
SAFETY CERTIFICATIONS:
- CSA: Class I, Division 1, Groups A, B, C and D, T4 Class II, Division 1, Groups E, F, G T85°C
- ATEX: 0575 II 1G Ex ia IIC T4 Ga, 2G Ex ia d IIC T4 Gb with IR Sensor installed, I M1 Ex ia I Ma
- IECEx: Ex ia IIC T4 Ga, Ex ia d IIC T4 Gb with IR Sensor installed, I M1 Ex ia I Ma
- IECEx/ANZEx: Ex ia IIC T4 Ga, Ex ia d IIC T4 Gb with IR Sensor installed, Ex ia I Ma,
- EMI/RFI5 EMC directive: 2004/108/EC
PERFORMANCE TESTS: MIL-STD-810G and 461F compliant. LEL CSA C22.2 No. 152; ISA-12.13.01
WARRANTY:
- Four years on Liq O2 sensors
- Three years on CO and H2S sensors
- Two years on non-consumable components and catalytic LEL sensors
- One year on all other sensors, pump, battery, and other consumable parts
WIRELESS FREQUENCY: ISM license free band. IEEE 802.15.4 Sub 1GHz, Wi-Fi 802.11 b/g
WIRELESS APPROVALS: FCC Part 15, CE R&TTE, Others
MultiRAE Pro PID Gas Detector, PGM-6248
Monitor-Only Configuration Includes:
- MultiRAE Pro monitor with sensors, pump, battery and wireless options as specified, and protective rubber boot, swivel belt clip and filter installed
- Continuous datalogging (6 months for 5 sensors @ 1-minute intervals)
- Travel charger / PC communications adapter
- PC communication cable
- AC adapter
- Calibration adapter
- Alkaline battery adapter
- Toolkit with Hex tool and Phillips screwdriver
- PID sensor cap removal tool
- PID zeroing filter (P/N: 008-3024-000)
- IP-67 / decontamination valve accessory
- 3 spare external filters
- 6'' flexi probe with inlet adapter
- Quick Start Guide
- CD with documentation
- ProRAE Studio II Instrument Configuration and Data Management Software
- Calibration and test certificate
- Warranty / registration card
- 10 charcoal VOC filters for CO sensor
- Instrument ships in a Pelican case with custom foam
Optional Accessories / Confined Space Kit Adds:
- Remote Sample Draw Kit (P/N: 008-3015-200):
- 10' (26 cm) aluminum sample probe with replaceable filters
- 3 hydrophobic barrier filters
- 10' (3 m) self-coiling Teflon® tubing w/ Luer-style quick-connect fitting
- Cal Kit Options:
- 10ppm Isobutylene only + regulator
- 100ppm Isobutylene only + regulator
- 4-gas mix only + regulator
- 4-gas mix w/ 10ppm Isobutylene + two regulators
- 4-gas mix w/ 100ppm Isobutylene + two regulators
- 4-gas mix w/ 10ppm Isobutylene & 100ppm Isobutylene + three regulators
MultiRAE Pro PID Gas Detector, PGM-6248
There are no reviews yet.