Beacon 110 Single Channel Wall Mount Controller

There are no reviews yet. | Write a review
Item #: 72-2110RK
Min Order: 0
Order Qty: Must order in multiples of 1
$850.25 Was: $895.00
Type:
Update price
View additional buying options

Beacon 110 Single Channel Wall Mount Controller

The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. It is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry's best value single gas detection controller. It is capable of accepting RKI sensors directly for LEL level combustibles, Oxygen, Hydrogen Sulfide, or Carbon Monoxide. The Beacon 110 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Sensors can be mounted directly at the Beacon 110 housing, or can be wired remote from the controller.

The 10 amp rated relays are strong enough to directly power external alarms and horns. The digital display has backlighting and simultaneous readout of the gas type and concentration.

The Beacon 110 is also housed in a NEMA 4X rated case for a weather tight seal. This case design complies with lock out / tag out standards and can be fully secured. An external reset switch allows the alarm to be silenced from outside of the controller housing. The Beacon 110 ships complete with a wall mounting kit for easy installation.

    Features:
  • Low cost versatile solution
  • Compact, weatherproof, NEMA 4X enclosure
  • 115/220 VAC or 24 VDC operation
  • Long life sensors (2+ years typical)
  • Accepts RKI LEL/O2/H2S/CO direct connect sensors
  • Accepts any 4-20 mA transmitter
  • Audible alarm with reset button
  • Two programmable alarm levels
  • Built-in trouble alarm with relay
  • Relay rating 10 amps, form C
  • Provides 4-20 mA output
PHYSICAL
DimensionsHeight: 8.5" (216 mm)
Width: 7.0" (178 mm)
Depth: 4.3" (109 mm)
EnclosureWall mounting gray polycarbonate with hinged cover
Conduit Connection3/4" NPT conduit hubs, 2 provided
1 for sensor wiring
1 for power & relay wiring
Wiring TerminationScrew type terminal block 14 gauge max
PowerUniversal 115 VAC & 220 VAC, or 24 VDC nominal,
battery backup option available
Controls3 internal push buttons for setup, programming,
& calibration. 1 external push button for alarm reset
ENVIRONMENTAL
Operating Temp-4°F to 122°F (-20°C to 50°C)
Storage Temp-4°F to 158°F (-20°C to 70°C)
Relative Humidity0 - 100% RH
Enclosure RatingNEMA -4X enclosure, waterproof, chemical, &
weather resistant
INPUTS 
Direct Wired SensorsLEL
Oxygen
Carbon Monoxide
Hydrogen Sulfide
Remote amp not required for less than 500 ft.
4-20 mA SensorsAccepts any 4-20 mA transmitter (24 VDC, 2
or 3 wire). A wide variety of RKI / Riken sensors
are available with 4-20 mA signals. Wiring distances
up to 5,000 ft.
Sampling MethodsDiffusion & sample draw heads available.
OUTPUTS 
Relays3 relays - 10 amp rating (at 115 VAC), SPDT
isolated contacts. 2 relays for gas alarms and 1
trouble relay.

Relays fully programmable for:
-increasing or decreasing alarm
-latching or self reset
-normally energized or normally de-energized
-time delay for alarm on / off
4-20 mASignal output, 4-20 mA (maximum load impedance
500 ohms), per channel
24 VDC24 VDC (400 mA max) output provided to operate
sample drawing adapters or other accessories
Display2 x 8 Alphanumeric display with backlighting
AudibleBuilt-in audible alarm, 94 dB, mounted on enclosure
Coded output: pulsing = gas alarm, steady = fail
Visual3 LED's on the front cover for alarm status 
indication and malfunction
WARRANTY1 Year Materials and Workmanship
Item # Description Price Qty
49-8103RK Beacon 110 and 200 Battery Back-up Assembly Selection $237.50
49-8104RK Beacon 110, 200, 410, and 800 Battery Back-up Assembly Selection $427.50
Related Items