SDM-2012 Stand Alone Bump Test Calibration Station for GX-2012
RKI’s new SDM-2012 calibration station for the GX-2012 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2012 inside the SDM-2012 calibration module, the GX-2012’s display will indicate whether it’s transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.
Multi Module System
The SDM-2012 can also be connected to a PC for automated calibration, bump testing, and archiving of logged data including calibration and bump test records, interval and alarm trends. Network up to 10 SDM-2012 stations to charge, calibrate, and bump test 10 instruments simultaneously.
User Guide Poster
Each SDM-2012 ships with a pictoral wall chart user guide. This guide gives the already easy to use cal station a simple pictorial easy step by step guide to calibrating or bump testing a GX-2012. It’s ideal to hang in an instrument shop or wherever the GX-2012 is located.
Includes:
- Single point calibration station for GX-2012
- model SDM-2012 w/ AC adaptor
- Flash drive
- USB cable
- Tubing
- Installation CD
- Demand flow Regulator (option)
- Cylinder(s) (option):
- 1st - 58L aluminum cylinder - H2S (25 ppm)/CO/CH4/O2
- 2nd - 58L steel cylinder - Methane 100% volume
SDM-2012 Stand Alone Bump Test Calibration Station for GX-2012
| Input Power |
- 12 VDC
- NOTE: AC Adapter with 100 - 240 VAC, 50/60 Hz, 0.6A input and 12 VDC, 1.2A output provided as standard. |
| Environmental Conditions |
- For Indoor Use Only
- -10° C to 40° C, below 80% Relative Humidity,
Non-Condensing |
| Applicable Instruments |
- GX-2012 and Gas Tracer |
| Maximum Number of Records Saved |
- 200 (stand-alone) |
| Number of Calibration Gas Cylinders |
- Up to two calibration gas cylinders per bump test or
calibration at a time |
| Standard Accessories |
- AC Adapter
- USB Flash Drive
- Single Module Data Viewer Software
- SDM Docking Station PC Controller Software
- Inlet Air Filter
- Instruction Manual
- 10 Foot Long Exhaust Tube
- Two 3 Foot Long Tubes for GAS 1 and GAS 2
Fittings
- 3 T-Fittings for PC Controlled Configuration
- USB Cable, Type A to Type B
|
SDM-2012 Stand Alone Bump Test Calibration Station for GX-2012
There are no reviews yet.