Chloroprene Detection Tubes 5/a (5 - 60 ppm)
For short-term measurements more than 160 Draeger Tubes are available to measure the so called spot concentrations of specific gases.
A wide range of different gases and vapors can be detected and measured, such as:
- Determining and measuring concentration peaks
- Measuring personal exposure in the inhalation area
- Detecting leaks in pipelines, gas installations etc.
- Air analysis in sewers, shafts and confined spaces.
|Standard Measuring Range:
||5 to 60 ppm
|Number of Strokes (n):
||3 + 3 desorption strokes in clean air
|Time for Measurement:
||approx. 3 min
||±10 to 15 %
||violet ─> yellow brown
||10 to 30° C
||3 to 15 mg H2O / L
||CH2 = CH-CCl = CH2 + MnO4- ──>
MnIV + various oxidation products
||Many other organic compounds with C=C double bonds are indicated as well, but with different sensitivities. It is impossible to differentiate them. It is impossible to measure chloroprene in the presence of dialkyl sulfides.