Fixed System Beacon Signaling Strobe Light w/ Horn

Fixed System Beacon Signaling Strobe Light w/ Horn

The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch between a temporal three pattern and a non-temporal (continuous) pattern. These options shall be set by a multiple position switch. On four-wire products, the strobe shall be powered independently of the sounder. The horn or horn strobe models shall operate on a coded or non-coded power supply. The horn strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The horn strobe shall be suitable for use in wet environments.

Beacon Signal Specifications:

• Operating Temperature –40°F to 151°F (–40°C to 66°C)
• Strobe Flash Rate 1 flash per second
• Nominal Voltage Regulated 12 DC/FWR or regulated 24 DC/FWR1
• Operating Voltage Range2 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
• Input Terminal Wire Gauge 12 to 18 AWG
• Wall-Mount Dimensions (including lens) 5.6 L × 4.7 W × 2.5 D (142 mm L × 119 mm W × 64 mm D)
• Horn Dimensions 5.6 L × 4.7 W × 1.3 D (142 mm L × 119 mm W × 33 mm D)
• Wall-Mount Weatherproof Back Box Dimensions (SA-WBB) 5.7" L × 5.1" W × 2.0" D (145 mm L × 130 mm W × 51 mm D)