Hydrogen Peroxide Detection Tubes 0.1/a (0.1 - 3 ppm)
For short-term measurements more than 160 Draeger-Tubes are available to measure the spot concentrations of specific gases. Measurement usually takes between 4 seconds and 15 minutes. The tubes are used either manually with the Draeger-Tube Accuro Pump or automatically with the Draeger X-act 5000.
A wide range of different gases and vapors can be detected and measured, such as:
- Determining and measuring concentration peaks
- Measuring personal exposure in the inhalation area
- Detecting leaks in pipelines, gas installations etc.
- Air analysis in sewers, shafts and confined spaces.
Hydrogen Peroxide Detection Tubes 0.1/a (0.1 - 3 ppm)
| Standard Measuring Range: |
0.1 to 3 ppm / 1 ppm |
| Number of Strokes (n): |
20 / 2 |
| Time for Measurement: |
approx. 3 min / approx. 18 sec |
| Standard Deviation: |
±10 to 15% |
| Color Change: |
white ?> brown |
| Temperature: |
10 to 25° C |
| Absolute Humidity: |
3 to 10 mg H2O / L |
| Reaction Principle: |
2 H2O2 + 2 Kl ??> I2 + 2 H2O + O2 |
| Cross Sensitivity: |
It is impossible to measure hydrogen peroxide in the presence of chlorine or nitrogen dioxide. Only hydrogen peroxide vapor is indicated, not the aerosols. |
Hydrogen Peroxide Detection Tubes 0.1/a (0.1 - 3 ppm)
There are no reviews yet.