Hydrochloric Acid Detection Tubes 50/a (50 - 5000 ppm)

There are no reviews yet. | Write a review
Item #: 6728181
MFG: Draeger
UOM: Box of 10
Min Order: 0
Order Qty: Must order in multiples of 1
$110.00
View additional buying options
Product Details

Hydrochloric Acid Detection Tubes 50/a (50 - 5000 ppm)

For short-term measurements more than 160 Draeger-Tubes are available to measure the spot concentrations of specific gases. Measurement usually takes between 4 seconds and 15 minutes. The tubes are used either manually with the Draeger-Tube Accuro Pump or automatically with the Draeger X-act 5000.

A wide range of different gases and vapors can be detected and measured, such as:

  • Determining and measuring concentration peaks
  • Measuring personal exposure in the inhalation area
  • Detecting leaks in pipelines, gas installations etc.
  • Air analysis in sewers, shafts and confined spaces

Hydrochloric Acid Detection Tubes 50/a (50 - 5000 ppm)

Standard Measuring Range: 500 to 5,000 / 50 to 500 ppm
Number of Strokes (n): 1 / 10
Time for Measurement: approx. 30 sec / approx. 5 min
Standard Deviation: ±10 to 15 %
Color Change: blue ?> white yellow
Temperature: 10 to 50° C
Absolute Humidity: max. 15 mg H2O / L
Reaction Principle: HCl + Bromophenol blue ??> white yellow reaction product
Cross Sensitivity: Hydrogen sulfide and sulfur dioxide do not interfere in the TLV range. It is impossible to measure hydrochloric acid in the presence of other mineral acids. Chlorine and nitrogen dioxide are indicated, but with different sensitivities.

Hydrochloric Acid Detection Tubes 50/a (50 - 5000 ppm)

There are no reviews yet.