Toluene Detection Tubes 50/a (50 - 400 ppm)
For short-term measurements more than 160 Draeger-Tubes are available to measure the so-called spot concentrations of specific gases. A wide range of different gases and vapours can be detected and measured, e.g.: Determining and measuring concentration peaks, Measuring personal exposure in the inhalation area, Detecting leaks in pipelines, gas installations etc., and Air analysis in sewers, shafts and confined spaces.Contains 10 tubes
|Standard Measuring Range||50 to 400 ppm|
|Number of strokes n:||5|
|Time for Measurement||approx. 1.5 min.|
|Standard Deviation||± 10 to 15 %|
|Color Change||white ──> brown|
|Temperature||10 to 30 °C|
|Absolute Humidity||5 to 12 mg H2O / L|
|Reaction Principle||Toluene + I2O5 + H2SO4 ──> I2|
|Cross Sensitivity||Xylenes are indicated, but with a lower|
Benzene discolours the entire indicated layer
a diffuse yellow.
Petroleum hydrocarbons discolour the entire
indicating layer a diffuse reddish brown.
Methanol, ethanol, acetone and ethyl acetate
in the TLV range do not interfere.