Acetone Detection Tubes 100/b (100 - 12000 ppm)
Drager Short-term Tubes have proven to be a very cost-effective and reliable method for the measurement of gases.
For short-term measurements more than 160 Drager-Tubes are available to measure the so-called spot concentrations of specific gases. Measurement usually takes between 4 seconds and 15 minutes. The tubes are used either manually with the Drager-Tube pump accuro or automatically with the Drager X-act 5000.
A wide range of different gases and vapours can be detected and measured, e.g.: Determining and measuring concentration peaks, Measuring personal exposure in the inhalation area, Detecting leaks in pipelines, gas installations etc., and Air analysis in sewers, shafts and confined spaces.
|Standard Measuring Range:
||100 to 12,000 ppm
|Number of Strokes (n):
|Time for Measurement:
||approx. 4 min.
||±15 to 20 %
||pale yellow -> yellow
||0 to 40° C
||5 to 20 mg H2O / L
||Acetone + 2.40Dinitrophenylhydrazine
─> yellow hydrazone
||Other ketones are indicated but with different sensitivities. Aldehydes are indicated, but not esters. Ammonia causes the indicating layer to turn yellowish brownish.