Thioether Detection Tubes (1 mg/m3)
For short-term measurements more than 160 Draeger Tubes are available to measure the so called spot concentrations of specific gases.
A wide range of different gases and vapors can be detected and measured, such as:
- Determining and measuring concentration peaks
- Measuring personal exposure in the inhalation area
- Detecting leaks in pipelines, gas installations etc.
- Air analysis in sewers, shafts and confined spaces
|Standard Measuring Range:
||1 mg/m3 is the minimum detectable concentration in the form of a ring.
|Number of strokes n:
|Time for Measurement:
||approx. 1.5 min
||± 50 %
||yellow ──> orange
||0 to 40 °C
||< 50 mg H2O / L
||R'-S-R + AuCl3 + Chloramide ──> orange reaction product
||Various thioethers are indicated, but it is impossible to differentiate between them.
||After performing the required eight pump strokes the reagent ampoule must be broken and the liquid transferred completely onto the indication layer.